产品别名 |
井体钢模具,圆形井体模具,井体模具,河北宏旭模具 |
面向地区 |
全国 |
井体钢模具
井体钢模具 井体钢模具是钢模具的一种，也是为重要的钢模具，现如今钢模具发展速度迅速，是人们比较看重的一类钢模具。井体钢模具主要用于电力检查井井体、燃气管道检查井井体、消防检查井体、雨水检查井体、污水井体制作。井体钢模具常用尺寸：直径分别为：40cm 、50cm、60cm、70cm、80cm、90cm、100cm、110cm、120cm、130cm、140cm、150cm、160cm、170cm、180cm、190cm、200cm 。井体钢模具是由外模和内模、井口模具、井盖模具、连接孔组合而成。井体模具生产用主板采用4mm钢板，用8mm筋板制作而成。井体模具的总高度为150cm，井口钢模具高为50cm，井体钢模具的总高度100cm，井体内径为100cm、外径120cm。井体钢模具的使用方法：要将井体钢模具内喷一层机油，为了脱模方便，然后将搅拌好的水泥倒入模具中，用振动棒将其振动，等水泥初期凝固便可脱模，约24小时左右，操作是非常简单方便的
井体钢模具 圆形井体模具 井体模具Well body steel mould well body steel mould is one of the most important steel moulds. Nowadays, the development of steel mould is very fast. It is a kind of steel mould that people pay more attention to. The steel mould of well body is mainly used for the manufacture of power inspection well body, gas pipeline inspection well body, fire inspection well body, rainwater inspection well body and sewage well body. Common dimensions of well body steel mould: diameter: 40cm, 50cm, 60cm, 70cm, 80cm, 90cm, 100cm, 110cm, 120cm, 130cm, 140cm, 150cm, 160cm, 170cm, 180cm, 190cm, 200cm. Well body steel mold is composed of external mold and internal mold, wellhead mold, well cover mold and connecting hole. The main board for well body mould production is made of 4mm steel plate and 8mm rib plate. The total height of the well body mould is 150cm, the height of the wellhead steel mould is 50cm, the total height of the well body steel mould is 100cm, the inner diameter of the well body is 100cm, and the outer diameter is 120cm. How to use the well steel mold: spray a layer of engine oil into the well steel mold for the convenience of demoulding, then pour the mixed cement into the mold, vibrate it with a vibrating rod, and demould it after the initial setting of the cement, about 24 hours, the operation is very simple and convenient
